Styrene-Acrylic, Acrylic and Polyvinyl Acetate water dispersion

WATER-BASED  POLYMER DISPERSIONS - OSAKRYL®, WINACET®, WOODMAX® 

Water-based polymer dispersion  is a heterogeneous system in which particles of acrylic, styrene-acrylic, vinyl-acetate, butadiene-styrene or other polymers are dispersed in water and stabilized by means of surface-active agents, thickeners and other additives. Water-based polymer dispersions act as a binder in paints, lacquers, varnishes, mastics, plasters and waterproofing masses, primers and other construction systems.

Among the manufacturers of water-based polymer dispersions, the international chemical company, Synthos S.A. (http://www.synthosgroup.com) (formerly known as Dwory S.A., since 1945 to 2008) takes a leading position in the European and Ukrainian market. Dispersions for paints, lacquers and adhesives under the trademarks of Osakryl®, Winacet®, Woodmax® are well-known to Ukrainian paint-producers and entrepreneurs. Known are these trademarks not only as high quality dispersions, but also due to a better economy and lower prime cost of the paint and lacquer end-products manufactured with the use of these dispersions.

Thanks to the proximity of the Synthos S.A. production facilities (~300 km from the Ukrainian border) – a consumer of Osakryl®, Winacet® and Woodmax® dispersions obtains significant savings at transporting the dispersions. This allows Ukrainian producers of paints, adhesives and other water-based systems to get much lower cost of manufacturing their own products. That explains the success of our customers at paint and varnish market, where stiff competition reigns.

In practice, the price difference of even less than one percent often leaves the paint product of more expensive competitors on the shelves of supermarkets to wait for better times. The manufacturers, who neglect the best quality and prime cost, simply disappear from the market. In order to get the customer’s decision in favour of your paint and lacquer products, the decision supported with his money, you are to know and remember the most successful dispersions of Synthos S.A. Here they are:

Dispersion Chemical composition Solids content % Rheotest viscosity, mPa*s Brookfield viscosity, mPa*s Glass transition temperature, Tg, ?Ñ Minimum Film Forming Temperature (MFFT), ?Ñ Mean particle size, d, nm ðÍ
Osakryl OSA-1Ì Acrylic-styrene 49 500 ÷ 2000 2000 ÷ 5000 13 ÷ 15 11 ÷ 13 100 ÷ 140 7÷ 9
Osakryl OSA-319Ì Styrene-acrylic 49 900 ÷ 2800 3000 ÷ 9000 33±2 30±2 ≈ 140 7,0÷ 9,0
Osakryl OSA-SÌ Styrene-acrylic 50   1000 ÷ 5000 28 ÷ 32 26 ÷ 30 100 ÷ 140 7,5÷ 8,5
Osakryl OSA 23NÌ Styrene-acrylic 49   2000 ÷ 6000 6 2 100 ÷ 140 7,5÷ 8,5
Osakryl OSA NÌ Styrene-acrylic 49   2000 ÷ 6000 6 2 100 ÷ 140 7,5÷ 8,5
Osakryl ÎSA A Acrylic-styrene 50   10000 ÷ 20000 - 1 < 0 110 ÷ 130 4,0÷ 6,0
Osakryl OSA S20 Styrene-acrylic 49   1000 ÷ 5000 23 20 100 ÷ 130 7,0÷ 7,5
Osakryl ÎSA Í Styrene-acrylic 55   1000 ÷ 5000 -40 <0 180 ÷ 210 7,0÷ 7,5
Osakryl ÀÍ-035 Acrylic 58   50 ÷ 300 -30 0 200 ÷ 300 5÷ 6
Osakryl ÀB-20 Acrylic 50   50 ÷ 500 18 ÷ 22 8 ÷ 12 90 ÷ 130 7,5÷ 8.5
Osakryl AP-40 Acrylic 29   5 ÷ 50 20 ≈ 0 40 ÷ 50 7,0÷ 8,0
Osakryl AW-24 Acrylic 48   50 ÷ 500 ≈ 24 ≈ 12 ≈ 100 7,0÷ 8,0
Osakryl AT-30 Acrylic 29÷ 32   5 ÷ 50 46 - 140 ÷ 160 2,1÷ 4,0
Winacet MDP 50 Vinyl acetate-maleic 50 ≥1000 7000 ÷ 16000 18 ÷ 20 4 ÷ 6 800 ÷ 1100 3,5÷ 5
Osakryl OB Vinyl acetate-acrylic 50 ≥700 2000 ÷ 7000 +14 +6 400 ÷ 500 3,5÷ 5,5
Winacet DP 50/00 Vinyl acetate 50   8000 ÷ 15000 39 ÷ 41 13 ÷ 15 2000 ÷ 4000 3÷ 5
Winacet DW 50 Vinyl acetate 50   ≥22000 38 ÷ 44 11 ÷ 14 1200 ÷ 2000 4÷ 5
Winacet DP 44/11 Vinyl-acetate (plasticized) 55   10000 ÷ 18000 -1 ÷ 1 < 0 2000 ÷ 4000 3÷ 5
Winacet DP 47/05 Vinyl acetate 52   ≥28000 21 ÷ 25 0 ÷ 2 2000 ÷ 4000 3÷ 5
Winacet DN 50/00 Vinyl acetate 50 100 ÷ 350   34 ÷ 38 13 ÷ 17 400 ÷ 600 3,5÷ 5
Woodmax WR 13.50 M Modified vinyl-acetate 50   11000 ÷ 15000 - 5 ÷ 7 - 3÷ 5

These data serves as a reference. The precise data for each lot are listed in the certificate of analysis. Other viscosities for vinyl-acetate dispersions are available on request. Technical parameters of the products can be changed by the manufacturer.

Environment. Water-based dispersions contain no Alkylphenol Ethoxylates.

Application:

  • As a binder for primers, plasters, decorative and protective paints for interior and exterior;
  • In Highly-elastic dispersion paints;
  • For water-soluble lacquers;
  • for paints and coatings that are moisture-resistant and wet scrub resistant;
  • in the production of putties, joint fillers, grouts for tile seams;
  • in cement-free plasters;
  • for production of deep-penetration primers for inorganic materials and building surfaces, wood, etc..;
  • as primer concentrates  for construction companies;
  • to modify the cement in the concrete and construction industry;
    to modify the rheological properties of paints, plasters and adhesives, to increase viscosity and reduce the deposition of pigments and fillers;
  • for high adhesion to various porous surfaces, like cement, cement-lime, etc.;
  • to create a hydraulic barrier and waterproofing compositions;
  • in the textile industry for fabric dressing and cloth finishing;
  • as a component of various adhesives, e.g. for wood and cardboard;
  • as adhesives and glues, ready to use;
  • for gluing and sizing of packaging containers for dry and bulk goods;
  • water-resistant D2 and D3 adhesives for window frames, building joinery components and structural units;
  • for bonding wood materials such as plywood, particleboard, fiberboard, etc.;
  • for bonding high pressure laminate that can withstand heavy loads, veneer to particle board and MDF.

Pricing and ordering information. Osakryl®, Winacet® and Woodmax®  dispersions are readily available in lots of 1 kg to 22 ton (tank trucks) from Chemcontinent company, the official distributor of Synthos S.A. in Ukraine, Belarus and Moldova. Direct deliveries are possible from warehouses in Kyiv (Kiev), Minsk (Belarus) and Oswiecim (Poland).

Packaging and transportation. Acid-proof and insulated railway tanks, tank trucks, plastic IBC-containers or metal drums with plastic inner bags. The packaging and method of transportation is not regulated by conditions for transportation of dangerous goods (ADR, RID). Other types of packaging can be used after approval. Packaging must not be destroyed by the product.

Storage of water-based dispersions. Store at temperatures from 5 to 35 °C. IBCs and drums should be stored in a single tier. When storing styrene-acrylic, acrylic and vinyl-acetate water-based dispersions one should avoid the extended exposure to direct sunlight.

Ñòîð³íêà óêðà¿íñüêîþ - "Ñòèðîë-àêðèëîâ³, àêðèëîâ³ òà ïîë³â³í³ëàöåòàòí³ âîäí³
äèñïåðñ³¿
"
Còðàíèöà íà ðóññêîì "Ñòèðîë-àêðèëîâûå, àêðèëîâûå è ïîëèâèíèëàöåòàòíûå âîäíûå
äèñïåðñèè
"

<< Back

site was created by ñàéò ðàçðàáîòàí êîìïàíèåé Ýôôåêò